mpls te timer auto-primary-tunnel delay-delete

Function

The mpls te timer auto-primary-tunnel delay-delete command sets the hold time of tunnels established using the automatic primary tunnel function.

The undo mpls te timer auto-primary-tunnel delay-delete command restores the default hold time.

By default, the hold time is 300s.

Format

mpls te timer auto-primary-tunnel delay-delete time-value

undo mpls te timer auto-primary-tunnel delay-delete

Parameters

Parameter	Description	Value
delay-delete time-value	Specifies the hold time of tunnels established using the automatic primary tunnel function.	The value is an integer ranging from 30 to 604800, in seconds.

Parameter

Description

Value

delay-delete time-value

Specifies the hold time of tunnels established using the automatic primary tunnel function.

The value is an integer ranging from 30 to 604800, in seconds.

Views

MPLS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

If the route or configuration of tunnels established using the automatic primary tunnel function is changed, the tunnel interface may be frequently created and deleted. For example, modifying an LSR ID may cause this problem. To prevent this problem, start a hold timer on a tunnel interface on which tunnels have been successfully established using the automatic primary tunnel function. Before the hold timer expires, the tunnel interface is not deleted even if the preceding problem occurs. To set the timer value, run the mpls te timer auto-primary-tunnel delay-delete command.

Prerequisites

The MPLS view has been displayed using the mpls command.

Example

# Set the hold time of tunnels established using the automatic primary tunnel function to 600 seconds.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls te timer auto-primary-tunnel delay-delete 600