multicast mvpn ipv6-underlay

Function

The multicast mvpn ipv6-underlay command configures a multicast virtual private network (MVPN) IPv6 ID.

The undo multicast mvpn ipv6-underlay command deletes an MVPN IPv6 ID.

By default, no MVPN IPv6 ID is configured.

Format

multicast mvpn ipv6-underlay mvpnid

undo multicast mvpn ipv6-underlay [ mvpnid ]

Parameters

Parameter	Description	Value
mvpnid	Specifies an MVPN ID in the format of an IPv6 address.	The value is in colon hexadecimal notation.

Parameter

Description

Value

mvpnid

Specifies an MVPN ID in the format of an IPv6 address.

The value is in colon hexadecimal notation.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mvpn	write

Usage Guidelines

Usage Scenario

To configure an MVPN IPv6 ID, run the multicast mvpnipv6-underlay command. The MVPN IPv6 ID is the IP address of the originator provider edge (PE) in an MVPN. An MVPN ID can be used as:

Originator router's IP address field value in auto-discovery (A-D) routes.
Administrator field value in the VRF Route Import Extended Community attribute in BGP VPNv4 routes. If the multicast ipv6 mvpn command is not run, PEs do not send A-D routes, and BGP VPNv4 routes do not carry the VRF Route Import Extended Community attribute.

Example

# Configure the MVPN IPv6 ID as 2001:db8:1::1.

<HUAWEI> system-view
[~HUAWEI] multicast mvpn ipv6-underlay 2001:db8:1::1