multicast egress statistics

Function

The multicast egress statistics command enables a device to collect statistics about downstream Layer 3 IPv4 multicast packets based on a multicast source and group.

The undo multicast egress statistics command disables a device from collecting statistics about downstream Layer 3 IPv4 multicast packets based on a multicast source and group.

By default, a device is disabled from collecting statistics about downstream Layer 3 IPv4 multicast packets based on a multicast source and group.

Format

multicast egress statistics [ vpn-instance vpn-instance-name ] source-address group-address slot slot-id

undo multicast egress statistics [ vpn-instance vpn-instance-name ] source-address group-address slot slot-id

Parameters

Parameter Description Value
vpn-instance vpn-instance-name

Specifies a VPN instance name.

The value is a string of 1 to 31 characters.

source-address

Specifies a multicast source address.

The value is in dotted decimal notation.

group-address

Specifies a multicast group address.

The value ranges from 224.0.1.0 to 239.255.255.255, in dotted decimal notation.

slot slot-id

Specifies a slot ID. The value range varies with the hardware of the router.

The value is a string of 1 to 15 characters, spaces not supported.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
forwarding write

Usage Guidelines

Usage Scenario

To enable a device to collect statistics about downstream Layer 3 IPv4 multicast packets based on a multicast source and group, run the display multicast egress statistics vpn-instance source-address group-address slot or display multicast egress statistics slot command to check statistics about downstream Layer 3 IPv4 multicast packets. The multicast egress statistics enable slot command takes precedence over the multicast egress statistics command. That is, if the multicast egress statistics enable slot command has been run on a device, the device is enabled to collect statistics about downstream Layer 3 IPv4 multicast packets regardless of whether the multicast egress statistics command is run. The multicast egress statistics command takes effect only if the multicast egress statistics enable slot command is not run.

Follow-up Procedure

Run the display multicast egress statistics vpn-instance source-address group-address slot or display multicast egress statistics slot command to check statistics about downstream Layer 3 IPv4 multicast packets.

Example

# Enable a device to collect statistics about downstream Layer 3 IPv4 multicast packets based on a specified multicast source and group.
<HUAWEI> system-view
[~HUAWEI] multicast egress statistics vpn-instance vpn1 10.10.10.10 225.0.0.1 slot 1
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >