multicast-nat instance-group

Function

The multicast-nat instance-group command creates a multicast NAT instance group and displays the multicast NAT instance group view.

The undo multicast-nat instance-group command is used to delete multicast-nat instance-group.

By default, no multicast NAT instance group is created.

This command is supported only on the NetEngine 8000 F1A.

Format

multicast-nat instance-group id instance-group-id [ name instance-group-name ]

undo multicast-nat instance-group id instance-group-id [ name instance-group-name ]

Parameters

Parameter	Description	Value
name instance-group-name	Specifies the name of a multicast NAT instance group.	The value is a string of 1 to 127 case-sensitive characters, spaces not supported.
id instance-group-id	Specifies the ID of a multicast NAT instance group.	The value is an integer that ranges from 1 to 4000 .

Parameter

Description

Value

name instance-group-name

Specifies the name of a multicast NAT instance group.

The value is a string of 1 to 127 case-sensitive characters, spaces not supported.

id instance-group-id

Specifies the ID of a multicast NAT instance group.

The value is an integer that ranges from 1 to 4000 .

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
forwarding	write

Usage Guidelines

Usage Scenario

Create a multicast-nat instance-group, and enter the multicast-nat instance-group view.

Command instructions: When configuring the multicast-nat instance-group, ensure that the flow type is either specified for all members or not specified for all members.

Prerequisites

Multicast NAT has been globally enabled using the multicast-nat enable command.

In VS mode, this command is supported only by the admin VS.

Example

# Create a multicast NAT instance group.

<HUAWEI> system-view
[~HUAWEI] multicast-nat enable
[*HUAWEI] multicast-nat instance-group id 1 name group1