multicast-nat outbound-group

Function

The multicast-nat outbound-group command is used to create multicast-nat outbound-group, and enter the multicast-nat outbound-group view.

The undo multicast-nat outbound-group command is used to delete multicast-nat outbound-group.

By default, no multicast NAT outbound group is created in the system.

This command is supported only on the NetEngine 8000 F1A.

Format

multicast-nat outbound-group id outbound-group-id [ name outbound-group-name ]

undo multicast-nat outbound-group id outbound-group-id [ name outbound-group-name ]

Parameters

Parameter	Description	Value
name outbound-group-name	Specifies the name of a multicast NAT outbound group.	The value is a string of 1 to 127 case-sensitive characters, spaces not supported.
id outbound-group-id	Specifies the ID of a multicast NAT outbound group.	The value is an integer that ranges from 1 to 4000 .

Parameter

Description

Value

name outbound-group-name

Specifies the name of a multicast NAT outbound group.

The value is a string of 1 to 127 case-sensitive characters, spaces not supported.

id outbound-group-id

Specifies the ID of a multicast NAT outbound group.

The value is an integer that ranges from 1 to 4000 .

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
forwarding	write

Usage Guidelines

Usage Scenario

In multicast NAT, to translate an input multicast stream into output multicast streams, create a multicast NAT instance and then associate the input multicast stream with the multicast NAT instance. If the multicast input is a multicast NAT instance group, the multicast output must be a multicast NAT outbound group. To create a multicast NAT outbound group, run the multicast-nat outbound group command.

Prerequisites

Multicast NAT has been globally enabled using the multicast-nat enable command.

Precautions

This command is supported only in the admin VS.

Example

# Create a multicast NAT outbound group.

<HUAWEI> system-view
[~HUAWEI] multicast-nat enable
[*HUAWEI] multicast-nat outbound-group id 1 name group1