multicast shaping

Function

The multicast shaping command creates and displays the multicast shaping view.

The undo multicast shaping command deletes the multicast shaping view.

By default, the multicast shaping view is not created.

Format

multicast shaping

undo multicast shaping

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
forwarding write

Usage Guidelines

Usage Scenario

To create and display a multicast shaping view, run the multicast shaping command.

You can configure only one multicast shaping view on one Router.

In VS mode, this command is supported only by the admin VS.

Example

# Create and display the multicast shaping view.
<HUAWEI> system-view
[~HUAWEI] multicast shaping
[*HUAWEI-qos-mshaping]
Parent Topic: Multicast QoS Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >