group-name

Function

The group-name command creates an NACM user group and displays the NACM user group view.

The undo group-name command deletes an NACM user group.

By default, no NACM user group is created.

Format

group-name group-name

undo group-name group-name

Parameters

Parameter	Description	Value
group-name	Specifies the name of an NACM user group.	The value is a string of 1 to 32 case-sensitive characters, spaces not supported. When quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

group-name

Specifies the name of an NACM user group.

The value is a string of 1 to 32 case-sensitive characters, spaces not supported.

When quotation marks are used around the string, spaces are allowed in the string.

Views

NACM view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
netconf	debug

Usage Guidelines

Usage Scenario

To allow an NACM user to use the rules in an NACM rule list, run the group-name command to create an NACM user group in the NACM view, add the NACM user to the user group, and then associate the created NACM user group with the rule list.

Follow-up Procedure

Run the group group-name command in the NACM rule list view to associate the created user group with the NACM rule list.

Precautions

To successfully delete an NACM user group, the user group must have been created and is not associated with any NACM authentication rule list.

NACM user groups that are not created on the local device in use are not supported.

Example

# Create an NACM user group named g1.

<HUAWEI> system-view
[~HUAWEI] netconf
[~HUAWEI-netconf] nacm
[~HUAWEI-netconf-nacm] group-name g1