write-default permit

Function

The write-default permit command enables users to perform configuration operations.

The undo write-default permit command disables users from performing configuration operations.

By default, users' permission to perform configuration operations is disabled.

write-default permit

undo write-default permit

None

NACM view

3: Management level

Task Name	Operations
netconf	debug

To enable users to perform configuration operations, run the write-default permit command.

Currently, the supported configuration operation is edit-config.

# Enable users to perform configuration operations.

<HUAWEI> system-view
[~HUAWEI] netconf
[~HUAWEI-netconf] nacm
[~HUAWEI-netconf-nacm] write-default permit