nat64 reverse-session-limit enable

Function

The nat64 reverse-session-limit enable command enables the limitation on the number of reverse IP sessions that can be established in an NAT64 instance.

The undo nat64 reverse-session-limit enable command disables a NAT device from limiting the number of reverse IP sessions that can be established in an NAT64 instance.

By default, the NAT64 session number limit function is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

nat64 reverse-session-limit enable

undo nat64 reverse-session-limit enable

Parameters

None

Views

NAT64 instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

The configured maximum number of reverse IP sessions that can be established can take effect only after the nat64 reverse-session-limit enable command is run.

Example

# Enable the limitation on the number of reverse IP sessions that can be established in a NAT64 instance named cpe1.

<HUAWEI> system-view
[~HUAWEI] nat64 instance cpe1 id 1
[*HUAWEI-nat-instance-cpe1] nat64 reverse-session-limit enable