nat64 session-limit enable

Function

The nat64 session-limit enable command enables the NAT64 session number limit function.

The undo nat64 session-limit enable command disables the NAT64 session number limit function.

By default, The NAT64 session number limit function is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

nat64 session-limit enable

undo nat64 session-limit enable

Parameters

Parameter	Description	Value
enable	Enables the limitation on the maximum number of user-to-network NAT64 sessions.	-

Parameter

Description

Value

enable

Enables the limitation on the maximum number of user-to-network NAT64 sessions.

Views

NAT64 instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

To enable the NAT64 session number limit function, run the nat64 session-limit enable command. The limit on the number of NAT64 sessions configured using the nat64 session-limit command takes effect only after the NAT64 session number limit function is enabled.

To set the maximum number of user-based NAT sessions that can be established, run the nat64 session-limit command in the NAT64 instance view.

Example

# Enable the NAT64 session number limit function in the view of a NAT64 instance named nat1.

<HUAWEI> system-view
[~HUAWEI] nat64 instance nat1 id 1
[*HUAWEI-nat64-instance-nat1] nat64 session-limit enable