nat alarm no-pat address-group disable

Function

The nat alarm no-pat address-group disable command disables the log and trap functions for No-PAT address pools.

The undo nat alarm no-pat address-group disable command restores the default configuration.

By default, the log and trap functions for No-PAT address pools is enabled

This command is supported only on the NetEngine 8000 F1A.

Format

nat alarm no-pat address-group { log | trap } disable

undo nat alarm no-pat address-group { log | trap } disable

Parameters

Parameter	Description	Value
log	Enables or disables the log alarm function for No-PAF address pools.	-
trap	Enables or disables the trap function for No-PAT address pools.	-
enable	Enables the log alarm function for No-PAF address pools.	-

Parameter

Description

Value

log

Enables or disables the log alarm function for No-PAF address pools.

trap

Enables or disables the trap function for No-PAT address pools.

enable

Enables the log alarm function for No-PAF address pools.

Views

NAT instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

The log and alarm functions for No-PAT address pools are enabled by default. To disable the log and trap functions for No-PAT address pools, run the nat alarm No-pat address-group disable.

Precautions

This command is applicable only to the NAT address pool in non-easy IP mode.

Example

# Disable the trap function for No-PAT address pools in a NAT instance named cpe1.

<HUAWEI> system-view
[~HUAWEI] nat instance cpe1 id 1
[*HUAWEI-nat-instance-cpe1] nat alarm no-pat address-group trap disable