nat static-mapping

Function

The nat static-mapping command creates or enters the static source tracing algorithm view.

The undo nat static-mapping command exits from the static source tracing algorithm view.

By default, the static source tracing algorithm view is not created.

This command is supported only on the NetEngine 8000 F1A.

Format

nat static-mapping

undo nat static-mapping

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

To create or enter the static source tracing algorithm view, run the nat static-mapping command. In the static source tracing algorithm view, you can configure the private network address pool, public network address pool, port range, port size, and their relationships based on the static source tracing algorithm.

Precautions

Before deleting the static source tracing algorithm view, delete all the existing configurations in the view.

Example

# Create the static source tracing algorithm view.

<HUAWEI> system-view
[~HUAWEI] nat static-mapping
[*HUAWEI-nat-static-mapping]