nat time

Format

nat time { endtime-second-dec | endtime-second-hex | starttime-second-dec | starttime-second-hex | starttime } { local | utc }

nat time { timestamp-second-dec | timestamp-second-hex | timestamp } { local | utc }

undo nat time { endtime-second-dec | endtime-second-hex | starttime-second-dec | starttime-second-hex | starttime } { local | utc }

undo nat time { timestamp-second-dec | timestamp-second-hex | timestamp } { local | utc }

Parameters

Parameter	Description	Value
endtime-second-dec	Indicates the end seconds expressed in decimal notation included in a log.	-
endtime-second-hex	Indicates the end seconds expressed in hexadecimal notation included in a log.	-
starttime-second-dec	Indicates the start seconds expressed in decimal notation included in a log.	-
starttime-second-hex	Indicates the start seconds expressed in hexadecimal notation included in a log.	-
starttime	Indicates the start time, including the year, month, day, hour, minute, and second.	-
local	Indicates the local time.	-
utc	Indicates the UTC time.	-
timestamp-second-dec	Indicates the seconds expressed in decimal notation of a timestamp.	-
timestamp-second-hex	Indicates the seconds expressed in hexadecimal notation of a timestamp.	-
timestamp	Indicates the timestamp, including the year, month, day, hour, minute, and second.	-

Views

Flexible log template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

The format of NAT syslog information can be flexibly configured. To configure a device to display the local time in NAT syslogs, run the nat time local command.

Prerequisites

A flexible NAT syslog template has been created, and the flexible log template view is displayed.

Precautions

The time format configured using the nat time command takes precedence over that configured using the nat time local command in the flexible log template view. If the nat time command is run, the time format of the end time, start time, or timestamp takes effect according to the configured format. If the nat time command is not run, the nat time local command takes effect. If neither the nat time command nor the nat time local command is run, the default UTC time takes effect.

Example

# Enable a device to display the UTC time in the starttime-second-dec field of NAT syslogs.

<HUAWEI> system-view
[~HUAWEI] nat syslog flexible template session
[~HUAWEI-nat-syslog-template-user] nat time starttime-second-dec utc