nat user-session create-rate limit enable

Function

The nat user-session create-rate limit enable command enables the limitation on the rate at which packets are sent to create a flow on a NAT device.

The undo nat user-session create-rate limit enable command disables the limitation on the rate at which packets are sent to create a flow on a NAT device.

The limitation on the rate at which packets are sent to create a flow on a NAT device is enabled by default.

This command is supported only on the NetEngine 8000 F1A.

Format

nat user-session create-rate limit enable

undo nat user-session create-rate limit enable

Parameters

None

Views

NAT instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

The limitation on the rate at which packets are sent to create a flow on a NAT device is enabled by default. To disable this function, run the undo nat user-session create-rate limit enable command.

Example

# Enable the limitation on the rate at which packets are sent to create a flow on a NAT device in a NAT instance named cpe1.

<HUAWEI> system-view
[~HUAWEI] nat instance cpe1 id 1
[*HUAWEI-nat-instance-cpe1] nat user-session create-rate limit enable