ne-number alarm threshold

Function

The ne-number alarm threshold command sets an alarm threshold for the number of NEs connected to the GNE.

The undo ne-number alarm threshold command restores the default value.

The default alarm threshold is 200.

Format

ne-number alarm threshold threshold

undo ne-number alarm threshold

Parameters

Parameter	Description	Value
threshold	Specifies the alarm threshold for the number of NEs.	The value is an integer ranging from 30 to 1000.The default alarm threshold is 200.

Parameter

Description

Value

threshold

Specifies the alarm threshold for the number of NEs.

The value is an integer ranging from 30 to 1000.The default alarm threshold is 200.

Views

DCN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
dcn	write

Usage Guidelines

Usage Scenario

To prevent a GNE from being overloaded with NEs, run the ne-number alarm threshold command to set an alarm threshold for the number of NEs. After the alarm threshold is reached, the GNE reports an alarm to the NMS.

The conditions for alarm generation are as follows:

If the number of NEs exceeds the configured threshold, the hwIpRanDcnNeNumberOverLoad alarm is generated.
If the number of NEs falls below the configured threshold, the hwIpRanDcnNeNumberOverLoadRecovery alarm is generated.

Prerequisites

The DCN feature has been enabled globally using the dcn command in the system view.

In VS mode, this command is supported only by the admin VS.

Example

# Set the alarm threshold for the number of NEs to 300.

<HUAWEI> system-view
[~HUAWEI] dcn
[*HUAWEI-dcn] ne-number alarm threshold 300