bandwidth cir

Format

bandwidth cir cir-value [ eir eir-value ]

undo bandwidth

Parameters

Parameter	Description	Value
eir eir-value	Specifies the EIR in a bandwidth profile.	The value is an integer ranging from 1 to 10000000, in kbit/s.
cir cir-value	Specifies the CIR in a bandwidth profile.	The value is an integer ranging from 8 to 10000000, in kbit/s.

Parameter

Description

Value

eir eir-value

Specifies the EIR in a bandwidth profile.

The value is an integer ranging from 1 to 10000000, in kbit/s.

cir cir-value

Specifies the CIR in a bandwidth profile.

The value is an integer ranging from 8 to 10000000, in kbit/s.

Views

NQA test flow view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

A bandwidth profile defines SLA service flow parameters, including the CIR and EIR.

A bandwidth profile must be specified for an Ethernet service activation test. Only after the bandwidth profile is specified, an initiator can construct and send test packets. Upon receipt of the test packets, the reflector calculates parameters, compares them with those in the bandwidth profile, and then determines whether the test is successful and whether the carrier network service deployment and network resources meet requirements for the tested services.

Precautions

This command is only run for an Ethernet service activation test instance.

Example

# Configure a bandwidth profile for an NQA service flow.

<HUAWEI> system-view
[~HUAWEI] nqa test-flow 1
[*HUAWEI-nqa-testflow-1] bandwidth cir 1000