cir simple-test enable

Function

The cir simple-test enable command enables the simple CIR test for NQA test flows.

The undo cir simple-test enable command disables the simple CIR test for NQA test flows.

By default, the step CIR test is enabled for NQA test flows.

cir simple-test enable

undo cir simple-test enable

None

NQA test flow view

2: Configuration level

Task Name	Operations
sla	write

Usage Scenario

Either of the following tests can be selected in an Ethernet service activation test:

Simple CIR test: The test speed is rapid, and the test time is short.
Step CIR test: It provides more accurate network status analysis, whereas the test time is longer than that a simple CIR test takes.

# Enable a simple CIR test for an NQA test flow.

<HUAWEI> system-view
[~HUAWEI] nqa test-flow 1
[*HUAWEI-nqa-testflow-1] cir simple-test enable