description (NQA test flow view)

Function

The description command configures the description for an NQA test instance.

The undo description command deletes the description of an NQA test instance.

By default, no description is configured for an NQA test instance.

Format

description description

undo description

Parameters

Parameter	Description	Value
description	Specifies the description of an NQA test instance.	The value is a string of 1 to 127 characters, spaces supported.

Parameter

Description

Value

description

Specifies the description of an NQA test instance.

The value is a string of 1 to 127 characters, spaces supported.

Views

NQA test flow view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

The description command describes a test instance, which facilitates maintenance.

Generally test items or test objects of a test instance are described.

Configuration Impact

If the description has been configured for an NQA test instance, running the description again overrides the previous configuration.

Precautions

If parameters need to be changed during the running of the test instance, the system prompts you whether to terminate the test instance. Press "Y" or "N" as required.

If you press "Y", the test instance is terminated and parameters changed. The settings take effect after being committed. To restart the test instance, run the start command.
If you press "N", the test instance keeps running, and the parameters fail to be modified.

Example

# Configure the description for a test service flow.

<HUAWEI> system-view
[~HUAWEI] nqa test-flow 1
[*HUAWEI-nqa-testflow-1] description this is a service activation test