traffic-policing test enable

Function

The traffic-policing test enable command enables the traffic policing test for NQA test flows.

The undo traffic-policing test enable command disables the traffic policing test for NQA test flows.

By default, the traffic policing test for NQA test flows is disabled.

Format

traffic-policing test enable

undo traffic-policing test enable

Parameters

None

Views

NQA test flow view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

A traffic policing test helps verify whether traffic policing takes effect on a tested network on which an Ethernet service activation test is conducted. If the traffic policing test for NQA test flows is disabled, a performance test is conducted immediately.

Precautions

This command is only run for an Ethernet service activation test instance.

Example

# Enable the traffic policing test for NQA test flows.

<HUAWEI> system-view
[~HUAWEI] nqa test-flow 1
[*HUAWEI-nqa-testflow-1] traffic-policing test enable