min-echo-rx-interval

Function

The min-echo-rx-interval command configures a minimum interval at which one-arm BFD echo session packets are received.

The undo min-echo-rx-interval command restores the default minimum interval at which one-arm BFD echo session packets are received.

By default, the minimum interval is 10 ms.

Format

min-echo-rx-interval interval

undo min-echo-rx-interval

Parameters

Parameter	Description	Value
interval	Specifies the minimum interval at which one-arm BFD echo session packets are received.	The value is an integer ranging from 3 to 20000, in milliseconds.

Parameter

Description

Value

interval

Specifies the minimum interval at which one-arm BFD echo session packets are received.

The value is an integer ranging from 3 to 20000, in milliseconds.

Views

BFD session view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bfd	write

Usage Guidelines

Usage Scenario

After creating a one-arm BFD echo session, you can configure a minimum interval at which one-arm BFD echo session packets are received.

Prerequisites

A one-arm BFD echo session has been configured using the bfd one-arm-echo command.

Example

# Set the minimum interval at which one-arm BFD echo session packets are received to 100 ms.

<HUAWEI> system-view
[~HUAWEI] bfd
[*HUAWEI-bfd] quit
[*HUAWEI] bfd session bind peer-ip 10.10.20.2 interface GigabitEthernet0/1/1 one-arm-echo
[*HUAWEI-session-session] quit
[*HUAWEI] bfd session
[*HUAWEI-bfd-session-session] min-echo-rx-interval 100