ospf bfd block multi-area

Function

The ospf bfd block multi-area command disables BFD on a multi-area adjacency interface.

The undo ospf bfd block multi-area command enables BFD on a multi-area adjacency interface.

By default, BFD is enabled on multi-area adjacency interfaces.

Format

ospf bfd block multi-area { area-id | area-id }

undo ospf bfd block multi-area { area-id | area-id }

Parameters

Parameter	Description	Value
area-id	Specifies the ID of an OSPF area.	The value can be a decimal integer ranging from 0 to 4294967295 or in the format of an IP address.

Parameter

Description

Value

area-id

Specifies the ID of an OSPF area.

The value can be a decimal integer ranging from 0 to 4294967295 or in the format of an IP address.

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

If the bfd all-interfaces enable command is run in an OSPF process, all interfaces on which neighbor relationships are in Full state in the OSPF process create BFD sessions. To disable BFD on a multi-area adjacency interface, run the ospf bfd block multi-area command.

Prerequisites

BFD has been enabled on the interface.
the ospf enable multi-area command has been run.

Precautions

The ospf bfd enable and ospf bfd block commands are mutually exclusive.

Example

# Disable BFD on multi-area adjacency interface.

<HUAWEI> system-view
[~HUAWEI] ospf 1
[*HUAWEI-ospf-1] area 0
[*HUAWEI-ospf-1-area-0.0.0.0] quit
[*HUAWEI-ospf-1] area 1
[*HUAWEI-ospf-1-area-0.0.0.1] quit
[*HUAWEI-ospf-1] quit
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] ospf enable 1 area 0
[*HUAWEI-GigabitEthernet0/1/0] ospf enable multi-area 1
[*HUAWEI-GigabitEthernet0/1/0] ospf bfd block multi-area 1