ospf flush-source-trace block

Function

The ospf flush-source-trace block command disables OSPF flush LSA source tracing on an interface.

The undo ospf flush-source-trace block command enables OSPF flush LSA source tracing on an interface.

By default, OSPF flush LSA source tracing is enabled on all interfaces.

Format

ospf flush-source-trace block

undo ospf flush-source-trace block

Parameters

None

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

By default, the OSPF flush LSA source tracing function is enabled on all interfaces of a specified OSPF process. To disable this function on an interface, run the ospf flush-source-trace block command.

Example

# Disable OSPF flush LSA source tracing on a specified interface.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/1
[~HUAWEI-GigabitEthernet0/1/1] ospf flush-source-trace block