ospf flush-source-trace port

Function

The ospf flush-source-trace port command configures a UDP port number for OSPF flush LSA source tracing packets.

The undo ospf flush-source-trace port command restores the default UDP port number for OSPF flush LSA source tracing packets.

By default, the UDP port number of global OSPF flush LSA source tracing packets is 50122, and the UDP port number of Vlink OSPF flush LSA source tracing packets is 50123.

Format

ospf flush-source-trace port port-number

ospf flush-source-trace vlink port port-number

undo ospf flush-source-trace port

undo ospf flush-source-trace vlink port

Parameters

Parameter	Description	Value
port-number	Specifies a UDP port number.	The value is an integer ranging from 1025 to 65535.

Parameter

Description

Value

port-number

Specifies a UDP port number.

The value is an integer ranging from 1025 to 65535.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

The OSPF flush LSA source tracing port receives and sends OSPF flush LSA source tracing packets, and the port is identified by a UDP port number.

If the UDP port number conflicts with that of an application, you can change the UDP port number of OSPF flush LSA source tracing packets using the ospf flush-source-trace port command. To change the UDP port number of Vlink OSPF flush LSA source tracing packets, run the ospf flush-source-trace vlink port command.

Example

# Set the UDP port number of OSPF flush LSA source tracing packets to 1512.

<HUAWEI> system-view
[~HUAWEI] ospf flush-source-trace port 1512