ospf suppress-flapping interface disable

Function

The ospf suppress-flapping interface disable command disables OSPF interface flapping suppression.

The undo ospf suppress-flapping interface disable command enables OSPF interface flapping suppression.

By default, OSPF interface flapping suppression is enabled.

Format

ospf suppress-flapping interface disable

undo ospf suppress-flapping interface disable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

If OSPF interfaces frequently alternate between up and down, the interfaces will flap, and protocol packets will be frequently exchanged, affecting OSPF services. To address this issue, run the undo ospf suppress-flapping interface disable command to enable interface flapping suppression. This function allows a device to delay interface state changes to up.

By default, interface flapping suppression is enabled globally for all OSPF interfaces. If this function is not needed, run the ospf suppress-flapping interface disable command to disable it.

Example

# Disable OSPF interface flapping suppression.

<HUAWEI> system-view
[~HUAWEI] ospf suppress-flapping interface disable