ospf remote-lfa disable

Function

The ospf remote-lfa disable command disables Remote LFA on OSPF interfaces.

The undo ospf remote-lfa disable command enables Remote LFA on OSPF interfaces.

By default, Remote LFA is disabled on all OSPF interfaces unless the remote-lfa command is run.

Format

ospf remote-lfa disable

undo ospf remote-lfa disable

Parameters

None

Views

100GE interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk interface view, FlexE interface view, GE optical interface view, GE electrical interface view, GMPLS-UNI interface view, Global VE sub-interface view, Tunnel interface view, VBDIF interface view, VE sub-interface view, VLANIF interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

If the remote-lfa command is run, Remote LFA is enabled on all OSPF interfaces. To disable Remote LFA on OSPF interfaces, run the ospf remote-lfa disable command with corresponding parameter specified.

Precautions

If the remote-lfa command is not run prior to the ospf remote-lfa disable command, the ospf remote-lfa disable command can be run, but its configuration does not take effect on interfaces.

If you run the remote-lfa command when the ospf remote-lfa disable command has been run, Remote LFA is disabled.

Example

# Disable Remote LFA on OSPF interfaces.

<HUAWEI> system-view
[~HUAWEI] interface GigabitEthernet 0/1/0
[~HUAWEI-GigabitEthernet0/1/0] ospf remote-lfa disable