frr (OSPFv3 view)

Function

The frr command creates an OSPFv3 FRR view and enters the OSPFv3 FRR view.

The undo frr command exits from the OSPFv3 FRR view and deletes the OSPFv3 FRR view.

By default, no OSPFv3 FRR view is created.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

frr

undo frr

Parameters

None

Views

OSPFv3 view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ospf	write

Usage Guidelines

Usage Scenario

OSPFv3 IP FRR needs to be configured in the OSPFv3 FRR view. To create an OSPFv3 FRR view and enter the OSPFv3 FRR view, run the frr command. To enable OSPFv3 IP FRR, run the loop-free-alternate command in the OSPFv3 FRR view so that a loop-free backup link can be generated.

Prerequisites

OSPFv3 has been enabled using the ospfv3 command.

Example

# Create an OSPFv3 FRR view and enter the OSPFv3 FRR view.

<HUAWEI> system-view
[~HUAWEI] ospfv3 1
[*HUAWEI-ospfv3-1] frr
[*HUAWEI-ospfv3-1-frr]