The whitelist session-car ospfv3 command sets parameters for OSPFv3 whitelist Session-CAR.
The undo whitelist session-car ospfv3 command restores the parameters for OSPFv3 whitelist Session-CAR to the default values.
By default, the OSPFv3 whitelist Session-CAR function is enabled.
| Parameter | Description | Value |
|---|---|---|
| cir cir-value |
Specifies a committed information rate (CIR), that is, the average rate at which packets can be transmitted or forwarded. |
The value ranges from 0 to 1000000, in kbit/s. The default value is 8. |
| cbs cbs-value |
Specifies a committed burst size (CBS), that is, the committed volume of burst traffic that can pass instantly. |
The value ranges from 0 to 1000000, in bytes. The default value is 100000. |
| pir pir-value |
Specifies a peak information rate (PIR), that is, the peak rate at which packets can be transmitted or forwarded. |
The value ranges from 0 to 1000000, in kbit/s. The default value is 16000. |
| pbs pbs-value |
Specifies a peak burst size (PBS), that is, the peak volume of burst traffic that can pass instantly. |
The value ranges from 0 to 10000000, in bytes. The default value is 9000000. |
Usage Scenario
If a Session-CAR parameter in anOSPFv3 whitelist is set to an excessively large or small value, the involvedOSPFv3 neighbor relationships may be disconnected or flap.
Implementation Procedure
If a Session-CAR parameter in anOSPFv3 whitelist is set to an excessively large or small value, the involvedOSPFv3 neighbor relationships may be disconnected or flap.
Precautions
If a Session-CAR parameter in anOSPFv3 whitelist is set to an excessively large or small value, the involvedOSPFv3 neighbor relationships may be disconnected or flap.