lsp-tp outbound (MPLS TE P2MP template view)

Function

The lsp-tp outbound command enables traffic policing for automatic P2MP TE tunnels.

The undo lsp-tp command disables traffic policing for automatic P2MP TE tunnels.

By default, traffic policing is disabled for automatic P2MP TE tunnels.

Format

lsp-tp outbound

undo lsp-tp

Parameters

None

Views

MPLS TE P2MP template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

Physical links over which a P2MP TE tunnel is established transmit traffic of other TE tunnels, traffic of non-CR LSP traffic, or even IP traffic, in addition to TE tunnel traffic. To limit TE traffic within a configured bandwidth range, run the lsp-tp outbound command.

Prerequisites

A P2MP tunnel template has been configured using the mpls te p2mp-template command.

Configuration Impact

After the mpls te lsp-tp outbound command is run, TE traffic is limited within a configured bandwidth range. TE traffic out of the range is discarded.

Example

# Traffic policing is enabled for automatic P2MP TE tunnel.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls te p2mp-te
[*HUAWEI-mpls] quit
[*HUAWEI] mpls te p2mp-template Template1
[*HUAWEI-te-p2mp-template-Template1] lsp-tp outbound