pbb i-tag (I-EVPN instance view)

Function

The pbb i-tag command configures an I-SID for an I-EVPN instance.

The undo pbb i-tag command deletes the I-SID of an I-EVPN instance.

By default, no I-SID is configured for an I-EVPN instance.

Format

pbb i-tag i-tag

undo pbb i-tag i-tag

undo pbb i-tag

Parameters

Parameter	Description	Value
i-tag	Specifies an I-SID.	The value is an integer ranging from 0 to 16777215.

Parameter

Description

Value

i-tag

Specifies an I-SID.

The value is an integer ranging from 0 to 16777215.

Views

I-EVPN instance view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

An I-SID uniquely identifies a broadcast domain. One I-EVPN instance corresponds to one I-SID. If two PEs share the same I-SID, the two PEs belong to the same BUM group.

Precautions

Only an I-EVPN instance with an I-SID configured can be bound to a B-EVPN instance.

Running the undo pbb i-tag command unbinds an I-EVPN instance from a B-EVPN instance and deletes the B-MAC address configured for the I-EVPN instance.

An I-SID cannot be modified after being configured. To change an I-SID, delete it using the undo pbb i-tag command and reconfigure a new one using the pbb i-tag command.

Example

# Configure an I-SID for an I-EVPN instance.

<HUAWEI> system-view
[~HUAWEI] evpn vpn-instance vrf1 i-evpn
[*HUAWEI-i-evpn-evpn-instance-vrf1] pbb i-tag 100