authentication keychain (Connect-PCE server view)

Function

The authentication keychain command enables keychain authentication for a PCEP session established between a PCE server and a PCE client.

The undo authentication keychain command disables keychain authentication for a PCEP session.

By default, keychain authentication is disabled for a PCEP session.

Format

authentication keychain keychain-name

undo authentication keychain

Parameters

Parameter	Description	Value
keychain-name	Specifies a keychain name. The keychain name is configured using the keychain command.	The value is a string of 1 to 47 characters.

Parameter

Description

Value

keychain-name

Specifies a keychain name. The keychain name is configured using the keychain command.

The value is a string of 1 to 47 characters.

Views

Connect-PCE server view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pce	write

Usage Guidelines

Usage Scenario

Keychain authentication can be configured to secure a PCEP session established between the PCE server and client. To configure keychain authentication for a PCEP session, run the authentication keychain command.

Prerequisites

A candidate PCE server has been specified for a PCE client using the connect-server command.

The keychain name is configured using the keychain command.

Example

# Enable keychain authentication on a PCE client.

<HUAWEI> system-view
[~HUAWEI] pce-client
[*HUAWEI-pce-client] connect-server 1.1.1.1
[*HUAWEI-pce-client-connect-1.1.1.1] authentication keychain Key1