peer (RIP view)

Function

The peer command specifies the IP address of a RIP neighbor on a non-broadcast multiple access (NBMA) network.

The undo peer command deletes the specified neighbor IP address.

By default, the IP address of a RIP neighbor on an NBMA network is not specified.

peer peer-address

undo peer peer-address

Parameter	Description	Value
peer-address	Specifies the neighbor IP address.	The value must be the address of a natural network segment, in dotted decimal notation.

Parameter

Description

Value

peer-address

Specifies the neighbor IP address.

The value must be the address of a natural network segment, in dotted decimal notation.

RIP view

2: Configuration level

Task Name	Operations
rip	write

Usage Scenario

After the peer command is configured, Update packets are sent to the neighbor in unicast mode.

# Specify the IP address of the neighbor as 10.0.0.1.

<HUAWEI> system-view
[~HUAWEI] rip 1
[*HUAWEI-rip-1] peer 10.0.0.1