The peer update-packet standard-compatible command enables a device to receive from and send to a specified BGP-VPNv4-multicast peer Update packets without labels.
The undo peer update-packet standard-compatible command enables a device to receive from and send to a specified BGP-VPNv4-multicast peer Update packets with labels.
By default, Huawei devices receive from and send to BGP-VPNv4-multicast peers or peer groups Update packets without labels.
Usage Scenario
According to standard protocols, the Update packets exchanged between BGP-VPNv4-multicast peers do not carry labels. However, the implementation on devices varies with the vendor. If a BGP-VPNv4-multicast peer relationship is established between two devices with different implementations, Update packets exchanged between them may be discarded. To enable a Huawei device to establish a BGP-VPNv4-multicast peer relationship with a non-Huawei device with a different implementation and allow the Huawei device to receive from and send to the peer Update packets with labels, run the undo peer update-packet standard-compatible command.
<HUAWEI> system-view [~HUAWEI] bgp 100 [*HUAWEI-bgp] peer 10.2.2.2 as-number 100 [*HUAWEI-bgp] ipv4-family vpnv4-multicast [*HUAWEI-bgp-af-vpnv4-multicast] peer 10.2.2.2 enable [*HUAWEI-bgp-af-vpnv4-multicast] undo peer 10.2.2.2 update-packet standard-compatible