peer-backup batch access

Function

The peer-backup batch access enable command enables users to go online during batch backup.

The undo peer-backup batch access enable command disables users from going online during batch backup.

By default, users are disabled from going online during batch backup.

This command is supported only on the NetEngine 8000 F1A.

Format

peer-backup batch access enable

undo peer-backup batch access enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rui	write

Usage Guidelines

Usage Scenario

To enable users to go online during RBS batch backup and allocate the IP address that is not in the IP address pool being back up in batch, run the peer-backup batch access enable command. To disable users from going online during RBS batch backup, run the undo peer-backup batch access enable command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable users to go online during batch backup.

<HUAWEI> system-view
[~HUAWEI] peer-backup batch access enable