peer-backup download-vrrp-table delay-time

Function

The peer-backup download-vrrp-table delay-time command configures the delay for disabling the forwarding function when the master device becomes the backup device.

The undo peer-backup download-vrrp-table delay-time command restores the default delay for disabling the forwarding function when the master device becomes the backup device.

By default, the delay is 0 seconds.

This command is supported only on the NetEngine 8000 F1A.

Format

peer-backup download-vrrp-table delay-time delay-time-value

undo peer-backup download-vrrp-table delay-time delay-time-value

Parameters

Parameter	Description	Value
delay-time-value	Specifies the delay time.	The value is an integer ranging from 0 to 60, in seconds.

Parameter

Description

Value

delay-time-value

Specifies the delay time.

The value is an integer ranging from 0 to 60, in seconds.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
rui	write

Usage Guidelines

Usage Scenario

To configure the delay for disabling the forwarding function when the master device becomes the backup device, run the peer-backup download-vrrp-table delay-time command.

Configuration Impact

After this command is run, when the master device becomes the backup device, the forwarding function is disabled delay-time-value seconds later. When delay-time-value is set to 0, the forwarding function is disabled immediately.

Example

# Set the delay for disabling the forwarding function when the master device becomes the backup device to 1s.

<HUAWEI> system-view
[~HUAWEI] peer-backup download-vrrp-table delay-time 1