peer advertise evpn mac-route detail-only(BGP-EVPN address family view)

Function

The peer advertise evpn mac-route detail-only command enables the device to advertise only specific MAC routes.

The undo peer advertise evpn mac-route detail-only command disables the function of advertising only specific MAC routes.

By default, specific MAC routes and UMRs are advertised.

Format

peer peerIpv4Addr advertise evpn mac-route detail-only

peer peerIpv4Addr advertise evpn mac-route detail-only disable

undo peer peerIpv4Addr advertise evpn mac-route detail-only

undo peer peerIpv4Addr advertise evpn mac-route detail-only disable

Parameters

Parameter	Description	Value
peerIpv4Addr	Specifies the IPv4 address of a peer.	The value is in dotted decimal notation.
disable	Disables the function of advertising specific MAC routes. After the command is run, the configuration of the group is not affected. If the command is undone, the configuration of the group is inherited.	-

Parameter

Description

Value

peerIpv4Addr

Specifies the IPv4 address of a peer.

The value is in dotted decimal notation.

disable

Disables the function of advertising specific MAC routes. After the command is run, the configuration of the group is not affected. If the command is undone, the configuration of the group is inherited.

Views

BGP-EVPN address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

In an EVPN scenario where a device needs to advertise only specific MAC routes but not UMR routes to a specified peer, run this command.

Example

# Enable the device to advertise only specific MAC routes in the BGP-EVPN address family view.

<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] peer 1.1.1.1 as-number 100
[*HUAWEI-bgp] l2vpn-family evpn
[*HUAWEI-bgp-af-evpn] peer 1.1.1.1 enable
[*HUAWEI-bgp-af-evpn] peer 1.1.1.1 advertise evpn mac-route detail-only