The peer route-policy export command specifies a route-policy for filtering routes to be advertised to a peer.
The undo peer route-policy export command deletes a specified route-policy.
By default, no route-policy is configured for the routes to be advertised to a specified BGP peer.
| Parameter | Description | Value |
|---|---|---|
| peerIpv6Addr |
Specifies the IPv6 address of a BGP peer. |
The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
| policy-name |
Specifies the name of a route-policy. |
The value is a string of 1 to 200 case-sensitive characters, spaces not supported. |
Usage Scenario
After a route-policy is created, the peer route-policy export command is used to apply a Route-Policy to a peer so that the routes advertised to the peer can be controlled. To be specific, only the necessary routes are advertised to the peer. In this manner, route management is implemented, the scale of the routing table is reduced, and fewer network resources are consumed.
Prerequisites
If the command specifies a route-policy that does not exist, use the route-policy command to create the route-policy.
Configuration Impact
If the peer route-policy command is run for a peer group, all the members of the peer group inherit the configuration.
The peer route-policy command is mutually exclusive with the peer route-filter commands. Binding a route-policy after a BGP peer relationship is established may cause peer flapping.<HUAWEI> system-view [~HUAWEI] route-policy aaa permit node 10 [*HUAWEI-route-policy] quit [*HUAWEI] bgp 100 [*HUAWEI-bgp] peer 2001:DB8:1::1 as-number 200 [*HUAWEI-bgp] ipv4-family unicast [*HUAWEI-bgp-af-ipv4] peer 2001:DB8:1::1 enable [*HUAWEI-bgp-af-ipv4] peer 2001:DB8:1::1 route-policy aaa export