The peer group command adds a peer to a peer.
The undo peer group command deletes a peer from a peer group and all configurations of the peer.
By default, no peer group is created.
| Parameter | Description | Value |
|---|---|---|
| ipv4-address |
Specify an IPv4 peer address. |
The value is in dotted decimal notation. |
| group-name |
Specifies the name of a peer group. |
The name is a string of 1 to 47 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
Usage Scenario
On a large-scale BGP network, there are a large number of peers and many of them have the same routing policies. To configure these peers, you have to repeatedly use some commands. In such a case, configuring peer groups can simplify configurations. If you intend to perform the same configuration on several peers, create and configure a peer. Then, add the peers to the peer group. The peers will inherit the configurations of the peer group.
Precautions
Peers with different AS numbers can be added to the same peer group. If a peer has an AS number, the peer keeps its own AS number after being added to a peer. If a peer has no AS number but the peer group to which the peer will be added has an AS number, the peer inherits the AS number of the peer group after being added to the peer group.
The members of a peer group can be configured with different route receiving and advertising policies. The undo peer group command has the same function with the undo peer command and the undo peer enable command.<HUAWEI> system-view [~HUAWEI] bgp 100 [*HUAWEI-bgp] peer 10.1.1.1 as-number 100 [*HUAWEI-bgp] group test internal [*HUAWEI-bgp] l2vpn-ad-family [*HUAWEI-bgp-af-l2vpn-ad] peer 10.1.1.1 enable [*HUAWEI-bgp-af-l2vpn-ad] peer test enable [*HUAWEI-bgp-af-l2vpn-ad] peer 10.1.1.1 group test