The rpf-vector compatible standard command configures a device to use the standard format to encapsulate Hello and Join/Prune messages that carry the vector attribute.
The undo rpf-vector compatible standard command restores the default configuration.
By default, a device uses the vendor-specific format to encapsulate Hello and Join/Prune messages that carry the vector attribute.
Usage Scenario
If a Huawei device uses the vendor-specific format to encapsulate Hello and Join/Prune messages that carry the vector attribute but its interworking non-Huawei device uses the standard format to encapsulate such messages, the two devices fail to communicate. To prevent this issue, run the rpf-vector compatible standard command to configure the Huawei device to use the standard format to encapsulate Hello and Join/Prune messages that carry the vector attribute.
Prerequisites
The function to enable Hello and Join/Prune messages to carry the vector attribute has been enabled.
<HUAWEI> system-view [~HUAWEI] multicast routing-enable [*HUAWEI] ip vpn-instance abc [*HUAWEI-vpn-instance-abc] route-distinguisher 1:1 [*HUAWEI-vpn-instance-abc-af-ipv4] quit [*HUAWEI-vpn-instance-abc] quit [*HUAWEI] pim vpn-instance abc [*HUAWEI-pim-abc] rpf-vector compatible standard