join-prune triggered-message-cache disable (IPv6 PIM view/VPN instance IPv6 PIM view)

Function

The join-prune triggered-message-cache disable command disables the Join/Prune message packaging function.

The undo join-prune triggered-message-cache disable command enables the Join/Prune message packaging function.

By default, this function is enabled.

Format

join-prune triggered-message-cache disable

undo join-prune triggered-message-cache disable

Parameters

None

Views

IPv6 PIM view, VPN instance IPv6 PIM view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pim	write

Usage Guidelines

Usage Scenario

The efficiency for sending PIM Join/Prune messages in a package is higher than that for separately sending a large number of PIM Join/Prune messages. By default, a device sends PIM Join/Prune messages in a package. Because the size of a PIM Join/Prune message package is large, devices that have poor performance cannot receive the PIM Join/Prune message package. If such devices exist, run the join-prune triggered-message-cache disable command to disable the Join/Prune message packaging function to prevent packet discarding.

Example

# Disable the Join/Prune message packaging function.

<HUAWEI> system-view
[~HUAWEI] multicast ipv6 routing-enable
[*HUAWEI] pim-ipv6
[*HUAWEI-pim6] join-prune triggered-message-cache disable