multicast rpf-vector path

Function

The multicast rpf-vector path command configures an RPF vector path to a multicast source.

The undo multicast rpf-vector path command deletes an RPF vector path to a multicast source.

By default, no RPF vector path to a multicast source is configured.

multicast rpf-vector path path-name [ strict | loose ]

undo multicast rpf-vector path path-name [ strict | loose ]

Parameter	Description	Value
path-name	Specifies a name for an RPF vector path.	The value is a string of 1 to 31 characters.
strict	Indicates a strict RPF vector path.	-
loose	Indicates a loose RPF vector path.	-

Parameter

Description

Value

path-name

Specifies a name for an RPF vector path.

The value is a string of 1 to 31 characters.

strict

Indicates a strict RPF vector path.

loose

Indicates a loose RPF vector path.

System view

2: Configuration level

Task Name	Operations
pim	write

Usage Scenario

To configure an RPF vector path to a multicast source, run the multicast rpf-vector path command.

# Configure a loose RPF vector path named toPE2.

<HUAWEI> system-view
[~HUAWEI] multicast rpf-vector path toPE2 loose
[*HUAWEI-rpf-vector-path-toPE2]

# Configure a strict RPF vector path named toPE1.

<HUAWEI> system-view
[~HUAWEI] multicast rpf-vector path toPE1 strict
[*HUAWEI-rpf-vector-path-toPE1]