path

Function

The path command configures the destination path where performance statistics files are uploaded on a PM server.

The undo path command deletes the configured destination path.

By default, performance statistics files are uploaded to the default path on a PM server.

path destination-path

undo path

Parameter	Description	Value
destination-path	Specifies the destination path where performance statistics files are uploaded on a PM server.	The value is a string of 1 to 63 case-sensitive characters, spaces not supported. When quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

destination-path

Specifies the destination path where performance statistics files are uploaded on a PM server.

The value is a string of 1 to 63 case-sensitive characters, spaces not supported.

When quotation marks are used around the string, spaces are allowed in the string.

PM server view

2: Configuration level

Task Name	Operations
perf-mgr	write

To upload performance statistics files to a specific path on the PM server, run the path command to configure the destination path.

# Configure the destination path where performance statistics files are uploaded on the PM server.

<HUAWEI> system-view
[~HUAWEI] pm
[~HUAWEI-pm] pm-server a
[*HUAWEI-pm-server-a] path /db