upload auto

Function

The upload auto command enables a device to automatically upload performance statistics files to a server.

The undo upload auto command disables a device from automatically uploading performance statistics files to a server.

By default, a device is disabled from automatically uploading performance statistics files to a server.

Format

upload auto request-name

undo upload auto

Parameters

Parameter	Description	Value
request-name	Specifies the name of a request for uploading performance statistics files to a server.	The value is a string of 1 to 31 characters. The string can contain letters, digits, and underscores (_). The name must start with letters or digits.

Parameter

Description

Value

request-name

Specifies the name of a request for uploading performance statistics files to a server.

The value is a string of 1 to 31 characters. The string can contain letters, digits, and underscores (_). The name must start with letters or digits.

Views

Statistics task view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
perf-mgr	write

Usage Guidelines

Usage Scenario

To enable the device to automatically upload performance statistics files to the PM server at a specific interval, run the upload auto command. This configuration allows the device to automatically upload performance statistics files to the server.

Prerequisites

A request for uploading performance statistics files to the PM server has been created using the upload-config command.

Example

# Enable the device to automatically upload performance statistics files to the PM server under the request named req1.

<HUAWEI> system-view
[~HUAWEI] pm
[~HUAWEI-pm] statistics-task huawei
[*HUAWEI-pm-statistics-huawei] upload auto req1