backup hot-standby (SR Policy template view)

Function

The backup hot-standby enable command enables the hot standby function in an SR Policy attribute template.

The undo backup hot-standby enable command deletes the preceding configuration.

The backup hot-standby disable command disables the hot standby function in an SR Policy attribute template.

The undo backup hot-standby disable command deletes the preceding configuration.

By default, the hot standby function in an SR Policy attribute template is not enabled.

Format

backup hot-standby { enable | disable }

undo backup hot-standby [ { enable | disable } ]

Parameters

Parameter	Description	Value
enable	Enables the hot standby function in an SR Policy attribute template.	-
disable	Disables the hot standby function in an SR Policy attribute template.	-

Parameter

Description

Value

enable

Enables the hot standby function in an SR Policy attribute template.

disable

Disables the hot standby function in an SR Policy attribute template.

Views

SR Policy template view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
srpolicy	write

Usage Guidelines

Usage Scenario

The backup hot-standby enable (SR Policy template view) command enables the hot standby function in an SR Policy attribute template, the srv6-te-policy backup hot-standby enable (Segment Routing IPv6 view) command globally enables the hot standby function for all SRv6 TE Policies in the Segment Routing IPv6 view, and the backup hot-standby enable (SRv6 TE Policy view) command enables the hot standby function for a single SRv6 TE Policy.

For the same SRv6 TE Policy, if both the srv6-te-policy backup hot-standby enable (Segment Routing IPv6 view) and backup hot-standby enable (SRv6 TE Policy view) commands are run and the template referenced by the primary path of the policy has hot standby configurations, the backup hot-standby enable (SRv6 TE Policy view) command configuration has the highest priority. The backup hot-standby enable (SR Policy template view) command configuration has the second highest priority, followed by the srv6-te-policy backup hot-standby enable (Segment Routing IPv6 view) command configuration.

Example

# Enable the hot standby function in an SR Policy attribute template.

<HUAWEI> system-view
[~HUAWEI] segment-routing policy-template 1
[*HUAWEI-sr-policy-template-1] backup hot-standby enable