cfm portid-tlv type

Function

The cfm portid-tlv type command sets a portid-tlv type for trace packets.

The undo cfm portid-tlv type command restores the default portid-tlv type.

By default, the portid-tlv type in trace packets is in the string format.

Format

cfm portid-tlv type { interface-name | local }

undo cfm portid-tlv type

Parameters

Parameter	Description	Value
interface-name	Indicates that the portid-tlv type is in the string format.	-
local	Indicates that the portid-tlv type is in the private format.	-

Parameter

Description

Value

interface-name

Indicates that the portid-tlv type is in the string format.

local

Indicates that the portid-tlv type is in the private format.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	write

Usage Guidelines

Usage Scenario

When using the trace function, you need to specify the type of the inbound and outbound interface names. You can use the cfm portid-tlv type command to set the type of interface names.

Vendors may adopt different TLV types. To implement interworking between Huawei and non-Huawei devices, you can configure interface-name to specify the interface name type as the string format.

On the network where only Huawei devices are used, to implement interworking between different versions, you can configure local to specify the interface name type as the private format.

Example

# Set the portid-tlv type to the string format.

<HUAWEI> system-view
[~HUAWEI] cfm portid-tlv type interface-name