pppuser-offline-standardize

Function

The pppuser-offline-standardize command configures the conversion of the PPP user offline reason.

The undo pppuser-offline-standardize command restores the default value.

By default, no conversion of the PPP user offline reason is configured.

This command is supported only on the NetEngine 8000 F1A.

Format

pppuser-offline-standardize

undo pppuser-offline-standardize

Parameters

None

Views

AAA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

Generally, the reason for user logout is fixed. To standardize the reason for PPP user logout, run the pppuser-offline-standardize command to convert the reason for PPP user logout caused by a handshake failure to the standard user logout reason. Specifically, the standard reason for user logout is that the user is proactively logged out or data transmission, and the reason is reported to the RADIUS server.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Configure the conversion of the PPP user offline reason.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] pppuser-offline-standardize