prompt

Function

The prompt command enables the prompt message to get the confirmation from the user to transfer the file or not.

The undo prompt command disables the prompt.

By default, the prompt is disabled.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

prompt

undo prompt

Parameters

None

Views

FTP client view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ftp-client	execute

Usage Guidelines

This command is applicable only for multiple file transfer commands mput and mget. In case of mget command, if the file already exists in the local device, system prompts the confirmation message whether to overwrite the file or not, irrespective of prompt is disabled or not.

Example

# Enable FTP prompt mode.

<HUAWEI> ftp 10.1.1.1
Trying 10.1.1.1 ...
Press CTRL + K to abort
Connected to 10.1.1.1.
220 VRPV8 FTP service ready.
User(10.1.1.1:(none)):John
331 Password required for John.
Password:
230 User logged in.
[ftp] prompt
Info: Switching prompt on succeeded.