protocol (Subscription view)

Function

The protocol command configures a protocol and encryption mode for the target collector that is associated with the current subscription.

The undo protocol command deletes the protocol and encryption mode configured for the target collector that is associated with the current subscription.

By default, no protocol and encryption mode are configured for the target collector that is associated with the current subscription.

Format

protocol { grpc [ no-tls ] | udp }

undo protocol

undo protocol { grpc [ no-tls ] | udp }

Parameters

Parameter	Description	Value
grpc	Specifies gRPC as the data reporting protocol.	-
no-tls	Parameter indicating whether to use TLS encryption. If this parameter is set, TLS encryption is not used. If this parameter is not set, TLS encryption can be used.	-
udp	Specifies UDP as the data reporting protocol.	-

Parameter

Description

Value

grpc

Specifies gRPC as the data reporting protocol.

no-tls

Parameter indicating whether to use TLS encryption.

If this parameter is set, TLS encryption is not used.
If this parameter is not set, TLS encryption can be used.

udp

Specifies UDP as the data reporting protocol.

Views

Subscription view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
telemetry	write

Usage Guidelines

Usage Scenario

To configure a protocol and encryption mode for the target collector associated with a created subscription, run the protocol command.

Precautions

Both this command and the ipv4-address port command or ipv6-address port command in the Destination-group view can configure a protocol and encryption mode for the target collector. If the target collector is associated with the subscription, command configurations take effect based on the following rules:

If this command has been run, the protocol and encryption mode configured by running this command in the Subscription view take effect.
If this command is not run, the protocol and encryption mode configured by running the ipv4-address port command or ipv6-address port command in the Destination-group view take effect.

Example

# Configure the gRPC protocol for the target collector associated with the subscription named a.

<HUAWEI> system-view
[~HUAWEI] telemetry
[~HUAWEI-telemetry] subscription a
[*HUAWEI-telemetry-subscription-a] protocol grpc