The lpt ptp interface command creates a point-to-point LPT root interface.
The undo lpt ptp interface command deletes a point-to-point LPT root interface.
By default, no point-to-point LPT root interface is created.
lpt ptp interface { interface-name | interface-type interface-number }
undo lpt ptp interface { interface-name | interface-type interface-number }
Specifies an interface type.
-
Specifies an interface number.
System view
2: Configuration level
Usage Scenario
To create a point-to-point LPT root interface, run the lpt ptp interface command.
Precautions
LPT supports primary and secondary PWs instead of bypass PWs.
<HUAWEI> system-view [~HUAWEI] mpls [*HUAWEI-mpls] quit [*HUAWEI] mpls l2vpn [*HUAWEI-l2vpn] quit [*HUAWEI] interface GigabitEthernet0/1/1 [*HUAWEI-GigabitEthernet0/1/1] mpls l2vc 1.1.1.1 100 [*HUAWEI-GigabitEthernet0/1/1] quit [*HUAWEI] lpt ptp interface GigabitEthernet0/1/1