ptp clock-source atr enable

Function

The ptp clock-source atr enable command enables 1588 ATR time source synchronization.

The undo ptp clock-source atr enable command disables 1588 ATR time source synchronization.

By default, 1588 ATR time source synchronization is disabled.

Format

ptp clock-source atr enable

undo ptp clock-source atr enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
clksync write

Usage Guidelines

Usage Scenario

To enable 1588 ATR time source synchronization, run this command.

This command applies only to 1588 ATR.

In VS mode, this command is supported only by the admin VS.

Example

# Enable 1588 ATR time source synchronization.
<HUAWEI> system-view
[~HUAWEI] ptp clock-source atr enable
Parent Topic: 1588 ACR-specific and 1588 ATR-specific Timing Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >