description (PW-FPS view)

Format

description text

undo description

Parameters

Parameter	Description	Value
text	Specifies the description of the current PW APS instance.	The value is a string of 1 to 63 case-sensitive characters, spaces supported.

Parameter

Description

Value

text

Specifies the description of the current PW APS instance.

The value is a string of 1 to 63 case-sensitive characters, spaces supported.

Views

PW-APS view, PW-FPS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

PW APS can be used to ensure the reliability of LDP, SVC, and PWE3 PWs. In PW APS networking, the PW APS instance status determines the protection switching in a PW protection group. A PW APS instance must be created first. To configure the description of a configured PW APS instance, run the description command.

Prerequisites

A PW APS instance has been created using the pw-aps command.

Precautions

Only the NetEngine 8000 F1A supports this command.

Example

# Configure the description of the current PW APS instance in single-ended PW APS mode.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] pw-aps 1 frr
[*HUAWEI-pw-aps-1] description HelloWorld!

# Configure the description of the current PW APS instance.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] pw-aps 1
[*HUAWEI-pw-aps-1] description HelloWorld!